Replacing an Old Water Heater: When and How to Upgrade for Better Efficiency

Replacing an Old Water Heater: When and How to Upgrade for Better Efficiency

If you live in an older house, chances are you have an old water heater. And if you’re using that old water heater, you probably aren’t getting the most out of it. Moreover, older systems also consume a lot of electricity, which can be problematic for the environment.

As a matter of fact, 41.3% of households in the US use electricity for water heating. In Oklahoma, two out of five houses use electricity as their primary energy mode to run heating and cooling equipment.

If your water heater is over ten years old, it might be time to upgrade to a newer and more efficient model. If you are worry that how to purchase a new heater then no need to worry. Read on for all the information about water heater financing Malden.

Signs it’s Time to Replace Your Water Heater

If you’re having problems with your water heater, it may be time to replace water heater Berkeley it. A few signs that a new water heater is needed include the following:

1.Your hot water tank is more than ten years old.

2.The energy efficiency of your current hot water tank has degraded over time and needs to be upgraded for better efficiency. Typical water heaters consume 4000 watts if run for 3 hours daily. Anything more than that should ring a bell.

3.You’re renting a home and need to replace a hot water tank for the landlord/property owner to get their tax credit from the government. According to Energystar, few US states give homeowners a tax credit for purchasing energy-efficient heaters if bought and installed between January 1, 2023, and December 31, 2032.

Choosing a New Water Heater

When looking for a new water heater, consider the size of your family and home. If more people are in the house than usual, such as during holidays or when visiting relatives come to town, having an extra-large tank will be very helpful.

If you have a large family or live in a big house with multiple bathrooms, consider getting one with at least 50 gallons per minute (GPM) capacity. That way, you won’t have to wait too long for hot water after using it all up.

How to Install a New Water Heater System

When you’re ready to install a new water heater, there are several things you should consider. The first thing is what type of water heater system you want to buy. You can choose either an electric tankless or gas-fired storage model.

If the home is connected to city gas lines, it is better to use an on-demand system that heats water as needed rather than storing it in a large tank.

Here are some tips that can help you install a new water heater system.

Hire a Professional Plumber

Hiring a professional to replace your water heater can save time and effort. It is also crucial to ensure everything goes right. While you can DIY plumbing, it is best if left to the professionals. This is because the plumbing system is vital to your house’s composure.

According to Wooten Knockout Plumbing, the plumbing system is at the heart of your house’s cleanliness and comfort. If it goes wrong, you might face even more significant challenges than you have until now due to plumbing issues.

The hot water installation Brisbane plumber will have experience installing this type of appliance, and they’ll also have the tools required for the job. Finding quality professionals licensed by your state or local municipality is essential.

Ask friends or family members if they know any plumbers, or search online at sites like Angie’s List or Yellow Pages.

Once you’ve narrowed down your list of potential plumbers based on recommendations and reviews, call each one individually so that you can ask questions about their services before making an appointment with them. This will help ensure that they’re right for you.

It is also vital to hire a local plumber for the work. If you go for local workers, staying connected with them for post-service maintenance will be easier. For instance, data shows that Oklahoma plumbing businesses receive non-stop duty calls during winter.

So if you live in one of the cities in Oklahoma, like Owasso, hiring a local plumber will ensure that you can quickly call him or her for further checks of the plumbing system if anything goes wrong after the repairs.

Considering that example, it will be best to look for services for plumbing in Owasso. Such local term searches on the internet can get you to contact information of some nearby businesses that can help you with your problem.

Preparation for Installation

Before you begin the installation process, there are some important things to do. First and foremost, turn off your water supply to prevent any accidents. Then drain the old water heater. You can connect it directly to a drain pipe or a bucket underneath it.

Once you’ve done these things, clean out any debris inside the space where your new water heater will go. You want this area as clear of clutter as possible so that nothing gets in between moving parts during installation or later operation.

Water Heater Installation

When you’re ready to install your new water heater, ensure its level. You’ll need to be able to access the top of your tank for testing and maintenance purposes, so make sure there’s enough room in your home for this.

Next, connect it properly. Connect one side of each hose or pipe from either side of your new water heater, taking care to follow the manufacturer’s guidelines. Ensure these connections are secure and don’t leak when pressure is applied through them later. Additionally, it’s essential to consider the replacement cost of water heaters, keeping in mind that proper installation can contribute to their longevity and efficiency.

Finally, check out our electrical connections section below before turning on any power sources. It’ll help ensure everything goes smoothly during and after installation. Proper installation will also ensure cost-effectiveness.

Homeguide says water heater installation costs $600 to $1,800 on average. The appropriate installation will keep the costs on the lower side of this range.

Maintenance and Care for Your New Water Heater

After you’ve installed your new water heater, it’s essential to keep it clean. Regular maintenance will help ensure your new unit performs well and lasts many years.

1.Clean the drain valve with a brush or cloth regularly. This can be done as often as every few months if needed, but every 6-12 months is ideal.

2.Do not use the drain valve or overflow tube for anything other than draining away excess water inside the tank; do not use them as trash cans or space heaters.

It’s also important not to use boiling water from one faucet while another runs cold. This could cause damage because hot steam would build up inside pipes leading into cold water tanks.


We hope this guide has helped you understand what to look for in a new water heater, how to properly install one, and some key benefits.

If you’re still unsure whether or not your current system needs replacing, don’t hesitate to ask a professional plumber who can give you the most accurate answer based on their experience working with different types of equipment.

Leave a Reply

Your email address will not be published. Required fields are marked *