
Perspex sheets or Plexiglass can also be called acrylic sheets, but beyond the strength, durability, and transparency that acrylic sheets are known for, Perspex sheets also offer color options. So, you can get Perspex sheets- strong, sturdy acrylic sheets in green, yellow, red, and more colors for your different projects.
They are commonly used for DIY indoor home projects because of their durability, flexibility, and versatility, so the question ‘how to cut perspex sheets?’ is more common than you think. You’re not alone.
Perspex sheets are super hard and strong; while some may require specialized tools to be cut, at the end of the day, it all depends on how thin or how thick the sheet is.
Depending on the thickness, some tools you have around your home can do the hard work of cutting your perspex sheet for you. If you’re crafting your next project with a perspex sheet, then this blog will show you some of the most common ways to cut it into the shape and size you want;
Using a Hand Saw
A common option for cutting anything, if you have a table and a fairly good saw, you should be able to cut your perspex sheet into any size you want.
It becomes a little tricky if you want more specific shapes other than the regular square or rectangle that a saw can easily cut. That’s where specialized machinery comes in.
Scoring and Breaking
This option is best for acrylic sheets below 5mm and for when you want to get random cuts. You only need your ruler, a scoring knife, and a flat surface. You’ll need to place the acrylic on the flat surface, mark the area you want to cut out with the scoring knife, and then bend it on the flat surface. It will take a few bends, but eventually, the sheet will break.
Laser Cut
This is one of the best ways to cut perspex sheets. It gives a precise and super clean cut regardless of your desired final shape or size. So, if you want to get more complicated shapes, a laser cut would be your best option. This has to be done by an expert, or someone who knows how to operate a laser cutting machine.
If you used a DIY cutting option, the fastest way to make your cut clean is to use a strong sandpaper or a buffing machine to smoothen the grits on the edge. This will give your perspex sheet a clean finish, so you can use it confidently.